Following was the agenda for the FEMCI Workshop. Both days' activities took place at the GSFC Visitor Center.
Wed., May 5, 2004 Poster & Vendor Session: 1:00-4:00 p.m.
|
1:00-1:10 p.m. |
Welcome to FEMCI Workshop 2004 |
1:10-1:30 p.m. |
Poster Introductions |
2:00-2:30 p.m. |
Vendor Introductions |
4:00 p.m. |
Session Wrap-Up |
|
|
Thur., May 6, 2004 Morning Session: 9:00 a.m. - 12:00 noon
|
9:00 a.m. |
Welcome |
9:05-10:00 a.m. |
KEYNOTE ADDRESS Dr. Ed Fasanella - NASA Langley Research Center
An Investigation of the Impact Damage Threshold of Space Shuttle Leading Edge Wing Panels
|
10:00-10:20 a.m. |
Morning Break |
10:20-10:40 a.m. |
Carl Blaurock - MIDE, Alice Liu - NASA GSFC, Gary Mosier - NASA GSFC
Disturbance-Optics-Controls-Structures (DOCS) Toolbox
|
10:40-11:00 |
Mark McGinnis - Swales, John Johnston - NASA GSFC, Gary Mosier - NASA GSFC, Joe Howard - NASA GSFC, Kong Ha - J&T, Tupper Hyde - NASA GSFC, Frank Liu - Swales, Keith Parrish - NASA GSFC
Integrated Modeling for the James Webb Space Telescope (JWST) Project: Structural Analysis Activities
|
11:00-11:20 a.m. |
Jonathan Kuhn - NASA GSFC, Andrew Bartoszyk - Swales, Tim Carnahan - NASA GSFC, Steve Hendricks - Swales, Charles Kaprielian - Swales, Cengiz Kunt - Swales
JWST ISIM Primary Structure and Kinematic Mount Configuration
|
11:20-11:40 a.m. |
Andrew Bartoszyk - Swales
Design/Analysis of Metal/Composite Bonded Joints for Survivability at Cryogenic Temperatures
|
11:40-12:00 noon |
Abed Khaskia - Mallett Technology, David Power - Mallett, James P. Loughlin - NASA GSFC
Iterative Magnetic/Structural Simulation of a MEMS Micro-shutter
|
12:00 - 1:00 p.m. |
Lunch |
|
|
Thur., May 6, 2004 Afternoon Session: 1:00 - 4:00 p.m.
|
1:00-1:20 p.m. |
Jason Mareno - Mallett Technology
Simulation Via Implicit Time Integration of Mobile Telephone Drop and Impact
|
1:20-1:40 p.m. |
Kyle Indermuehle - ATA Engineering, Mike Sasdelli - ABAQUS East LLC
Dynamic and Impact Analysis of Aerospace Vehicles using ABAQUS/Explicit
|
1:40-2:30 p.m. |
SPECIAL INVITED GUEST SPEAKER Dr. Fahim Sadek - National Institute of Standards and Technology
Analysis of the Aircraft Impacts into the World Trade Center Towers
|
2:20-2:40 p.m. |
Break |
2:40-3:00 p.m. |
Craig Stevens - NASA GSFC
Fastened Joint Analysis and Test Correlation of the Mercury Laser Altimeter (MLA) Beam Expander
|
3:00-3:20 p.m. |
Michael Lou - JPL and Houfei Fang - JPL
Structural Analysis and Model Synthesis of Solar Sails
|
3:20-3:40 p.m. |
Frank Baginski - GWU and Willi Schur
Exploring the elements that obstruct the successful deployment of the pumpkin balloon and other pneumatic envelopes
|
3:40-4:00 p.m. |
Fred Perkins - Syncretek LLC
Robust Design Capabilities for FEM Verisimiltude
|
4:00 p.m. |
Workshop Wrap-up |